Design, Print, Sand, Surf

They need to be sanded after printing. I prefer 36, wet 120, 220 and wet 400. $30 for your ding repair friend to do it is an okay deal too.

A view for you to see the sweep of the wings. Those on the back fin are not exactly like the ones on the side fins, less sweep and they've currently got 1.13° more 'up-elevator' than the wings in front as well.

Wings on side fins only here, better for rail surfing like you're on a twin.

Slash at the Lane. Fin set: Megawatts, wings on side fins. 

Carving. Fin set: Megawatts, wings on side fins.

  • @Fins.Surf

    I've got three insta accounts that have good content in each. Moving forward I'll maintain a theme for each of these.

    @Fins.Surf insta 
  • @__Fins.Surf__

    First surf video I've made in a long time can be found in this one, made with about 9 posts in a row.

    @__Fins.Surf__ insta 
  • @Stormfins

    Want to see the whole journey? I've tried out a few names over the years.

    @Stormfins insta